Power / Gains
If the search is specific, the proof should be specific too. That is why these pages stay tied to matched gains and to the real workflow behind the order.
Audi remap results page using matched A4, A6 and A7 diesel examples. We only show matched gains we can stand behind. 13 matched variants are attached to this page.
This page is here to help the buyer or seller make a cleaner decision before the file enters live workflow. Keep the answer grounded in real constraints, realistic examples and a clear path back into validated handling.
We only show matched records we can stand behind. If the catalog match is broad or unclear, we leave it out on purpose instead of forcing a number onto the page.
Matched variant #1
4GA 2010-2018
| Brand | Audi |
|---|---|
| Model | A7 |
| Generation | 4GA 2010-2018 |
| Engine | 3.0 V6 TDI 245 |
| Stock HP | 245 |
| Stage 1 HP | 295 |
| Stock Nm | 500 |
| Stage 1 Nm | 600 |
Matched variant #2
C8 07/2018-
| Brand | Audi |
|---|---|
| Model | A6 |
| Generation | C8 07/2018- |
| Engine | S TDI (3.0D) 349 |
| Stock HP | 349 |
| Stage 1 HP | 400 |
| Stock Nm | 700 |
| Stage 1 Nm | 820 |
Matched variant #3
C8 07/2018-
| Brand | Audi |
|---|---|
| Model | A6 |
| Generation | C8 07/2018- |
| Engine | 50 TDI (3.0D) 286 |
| Stock HP | 286 |
| Stage 1 HP | 350 |
| Stock Nm | 620 |
| Stage 1 Nm | 720 |
Matched variant #4
C8 07/2018-
| Brand | Audi |
|---|---|
| Model | A6 |
| Generation | C8 07/2018- |
| Engine | 45 TDI (3.0D) 231 |
| Stock HP | 231 |
| Stage 1 HP | 350 |
| Stock Nm | 500 |
| Stage 1 Nm | 720 |
Matched variant #5
C7 2011-2018
| Brand | Audi |
|---|---|
| Model | A6 |
| Generation | C7 2011-2018 |
| Engine | 3.0 V6 BI TDI Competition 326 |
| Stock HP | 326 |
| Stage 1 HP | 390 |
| Stock Nm | 650 |
| Stage 1 Nm | 780 |
Matched variant #6
C7 2011-2018
| Brand | Audi |
|---|---|
| Model | A6 |
| Generation | C7 2011-2018 |
| Engine | 3.0 V6 TDI 320 |
| Stock HP | 320 |
| Stage 1 HP | 390 |
| Stock Nm | 650 |
| Stage 1 Nm | 780 |
Matched variant #7
C7 2011-2018
| Brand | Audi |
|---|---|
| Model | A6 |
| Generation | C7 2011-2018 |
| Engine | 3.0 V6 BI TDI 313 |
| Stock HP | 313 |
| Stage 1 HP | 350 |
| Stock Nm | 650 |
| Stage 1 Nm | 720 |
Matched variant #8
B8 Mk2 2012-2015
| Brand | Audi |
|---|---|
| Model | A4 |
| Generation | B8 Mk2 2012-2015 |
| Engine | 2.0 TDI 190 |
| Stock HP | 190 |
| Stage 1 HP | 220 |
| Stock Nm | 400 |
| Stage 1 Nm | 450 |
Matched variant #9
B8 Mk2 2012-2015
| Brand | Audi |
|---|---|
| Model | A4 |
| Generation | B8 Mk2 2012-2015 |
| Engine | 2.0 TDI 177 |
| Stock HP | 177 |
| Stage 1 HP | 210 |
| Stock Nm | 380 |
| Stage 1 Nm | 430 |
Matched variant #10
B8 Mk2 2012-2015
| Brand | Audi |
|---|---|
| Model | A4 |
| Generation | B8 Mk2 2012-2015 |
| Engine | 2.0 TDI 163 |
| Stock HP | 163 |
| Stage 1 HP | 210 |
| Stock Nm | 380 |
| Stage 1 Nm | 430 |
Matched variant #11
B8 Mk2 2012-2015
| Brand | Audi |
|---|---|
| Model | A4 |
| Generation | B8 Mk2 2012-2015 |
| Engine | 2.0 TDI 150 |
| Stock HP | 150 |
| Stage 1 HP | 195 |
| Stock Nm | 320 |
| Stage 1 Nm | 410 |
Matched variant #12
B8 Mk2 2012-2015
| Brand | Audi |
|---|---|
| Model | A4 |
| Generation | B8 Mk2 2012-2015 |
| Engine | 2.0 TDI 143 |
| Stock HP | 143 |
| Stage 1 HP | 185 |
| Stock Nm | 320 |
| Stage 1 Nm | 410 |
Matched variant #13
B8 Mk2 2012-2015
| Brand | Audi |
|---|---|
| Model | A4 |
| Generation | B8 Mk2 2012-2015 |
| Engine | 2.0 TDI 136 |
| Stock HP | 136 |
| Stage 1 HP | 185 |
| Stock Nm | 320 |
| Stage 1 Nm | 410 |
Alientech
All-in-one ECU and TCU programming via OBD, Bench and Boot.
Alientech positions KESS3 as a single-device ECU / TCU programming platform combining OBD, Bench and Boot access for engine and gearbox controllers.
TuningBay supports KESS3-based read / write workflow when the file, protocol and controller family are validated for the job.
Magic Motorsport
ECU and TCU programmer covering OBD, Bench and Boot.
Magic Motorsport presents Flex as an ECU / TCU programmer for mechatronic professionals, with OBD, Bench and Boot operating modes.
TuningBay can deliver calibrated files for Flex workshop workflow, including stock-file intake, reviewed output and return delivery.
AutoTuner
Universal ECU / TCU programming and diagnostic tool for professionals.
AutoTuner describes its Tool as a universal ECU / TCU programming and diagnostic platform supporting OBD, Bench and Boot for professional tuners.
TuningBay supports AutoTuner file-service workflow where the controller, method and original read are confirmed before delivery.
bFlash
ECU reprogramming tool with OBD, Bench and Boot plus diagnostics.
bFlash positions itself as an ECU / TCU programming tool with OBD, Bench and Boot access, together with diagnostics, datalogging and real-time tuning features.
TuningBay can work with bFlash-based workshop flow when the original read and target solution are validated against the exact controller context.
Dimsport
Stand-alone Dimsport platform combining OBD, BENCH and OPEN.
Dimsport positions The Genius as its next-generation stand-alone ECU programming tool, combining OBD, BENCH and OPEN modes in one device.
TuningBay supports The Genius workflow around validated file requests and operator-reviewed delivery, not anonymous instant file pushing.
Dimsport
Stand-alone serial programming via OBDII or dedicated connectors.
Dimsport describes New Genius as a stand-alone serial communication tool for ECU programming through OBDII or specific diagnostic connectors.
TuningBay can support New Genius read / modify / write jobs when the original read and exact protocol path are confirmed first.
DFB Technology
Professional ECU / TCU tool covering OBD, Bench, Boot / BAM and JTAG.
DFB Technology presents DFOX as a single device for reading and writing engine ECUs and automatic transmissions through OBD, Bench Mode, Boot / BAM and JTAG workflows.
TuningBay can support DFOX-based workshop flow when the exact protocol path, controller family and file scope are validated before delivery.
EVC
Professional map editing environment with hex, 2D and 3D workflows.
EVC presents WinOLS as a professional calibration environment for map search, map editing and work in table, 2D, 3D and hexadecimal views.
TuningBay workflows are compatible with WinOLS-centered calibration and review pipelines when the file scope and export path are controlled.
Alientech
Portable recalibration software for engine and automatic transmission files.
Alientech positions ECM Titanium as recalibration software for engine and automatic transmission files with tabular, 2D, 3D and hexadecimal visualization.
TuningBay can fit ECM Titanium style workshop flow, from stock-file intake through validated output prepared for the target programming tool.
Dimsport
Remapping software with setting files, charts and checksum workflow.
Dimsport presents Race EVO as remapping software for optimizing engine management parameters with setting files, 2D / 3D charts and automatic checksum handling.
TuningBay can support Race EVO-centered delivery workflow where the exact file path and network role are validated before release.
Alientech
All-in-one ECU and TCU programming via OBD, Bench and Boot.
Alientech positions KESS3 as a single-device ECU / TCU programming platform combining OBD, Bench and Boot access for engine and gearbox controllers.
TuningBay supports KESS3-based read / write workflow when the file, protocol and controller family are validated for the job.
Magic Motorsport
ECU and TCU programmer covering OBD, Bench and Boot.
Magic Motorsport presents Flex as an ECU / TCU programmer for mechatronic professionals, with OBD, Bench and Boot operating modes.
TuningBay can deliver calibrated files for Flex workshop workflow, including stock-file intake, reviewed output and return delivery.
AutoTuner
Universal ECU / TCU programming and diagnostic tool for professionals.
AutoTuner describes its Tool as a universal ECU / TCU programming and diagnostic platform supporting OBD, Bench and Boot for professional tuners.
TuningBay supports AutoTuner file-service workflow where the controller, method and original read are confirmed before delivery.
bFlash
ECU reprogramming tool with OBD, Bench and Boot plus diagnostics.
bFlash positions itself as an ECU / TCU programming tool with OBD, Bench and Boot access, together with diagnostics, datalogging and real-time tuning features.
TuningBay can work with bFlash-based workshop flow when the original read and target solution are validated against the exact controller context.
Dimsport
Stand-alone Dimsport platform combining OBD, BENCH and OPEN.
Dimsport positions The Genius as its next-generation stand-alone ECU programming tool, combining OBD, BENCH and OPEN modes in one device.
TuningBay supports The Genius workflow around validated file requests and operator-reviewed delivery, not anonymous instant file pushing.
DFB Technology
Professional ECU / TCU tool covering OBD, Bench, Boot / BAM and JTAG.
DFB Technology presents DFOX as a single device for reading and writing engine ECUs and automatic transmissions through OBD, Bench Mode, Boot / BAM and JTAG workflows.
TuningBay can support DFOX-based workshop flow when the exact protocol path, controller family and file scope are validated before delivery.
Dimsport
Bench / open programmer for BDM, BOOT, JTAG, NBD and BAM operations.
Dimsport positions New Trasdata as a bench and open-mode programmer supporting BDM, BOOT, JTAG, NBD and BAM operations across a broad CPU range.
TuningBay supports bench / boot workflow around New Trasdata when the ECU or TCU path is validated and the risk profile is acceptable for the job.
No. TuningBay only shows matched records we can pair safely. If the dataset is too broad or ambiguous, the page stays conservative on purpose.
Use the workflow behind the page. The job can move into direct file service on TuningBay or into the wider portal flow used by file sellers and workshops.