Variant 1
ECU- Catalog engine
- 5600 318HP
- Controller brand
- HITACHI
- ECU
- SH7058
- Stock power
- 318 HP
- SW upgrade
- 1ZS61A
- Calibration
- 1ZS61A
NISSAN · SH7058 ECU
NISSAN FRONTIER SH7058 tuning files
Here is what the catalog holds for the NISSAN FRONTIER on the SH7058. The matched variants sit between 144 and 318 HP from the factory. Stage 1 and Stage 2 are the safe starting points for this platform. Each file is tied to the precise software on your car and checked before it goes out.
Available solutions
Solutions that apply to the SH7058 on this vehicle platform. The exact set depends on the specific engine and software version.
Engine variants & ECU software
8 distinct variants for the NISSAN FRONTIER on the SH7058 ECU. Reference the engine and controller software when you upload.
Variant 2
ECU- Catalog engine
- 2500 144HP
- Generation
- D40 2005-2015
- Matched gains engine
- 2.3DI 144
- Controller brand
- DENSO
- ECU
- SH7058
- Stock power
- 144 HP
- Stage 1 power
- 190 HP
- Power increase
- +46 HP (+32%)
- Stock torque
- 350 Nm
- Stage 1 torque
- 420 Nm
- Torque increase
- +70 Nm (+20%)
- ECU SW
- T2G23420B3
- ECU HW
- E30VU4D
- SW upgrade
- JS49A
- Calibration
- E30VU4D_T2G23420B3_JS49A
Variant 3
ECU- Catalog engine
- 2500 144HP
- Generation
- D40 2005-2015
- Matched gains engine
- 2.3DI 144
- Controller brand
- DENSO
- ECU
- SH7058
- Stock power
- 144 HP
- Stage 1 power
- 190 HP
- Power increase
- +46 HP (+32%)
- Stock torque
- 350 Nm
- Stage 1 torque
- 420 Nm
- Torque increase
- +70 Nm (+20%)
- ECU SW
- T2G23420A5
- ECU HW
- E30VU4D
- SW upgrade
- JS46A
- Calibration
- E30VU4D_T2G23420A5_JS46A
Variant 4
ECU- Catalog engine
- 2500 144HP
- Generation
- D40 2005-2015
- Matched gains engine
- 2.3DI 144
- Controller brand
- DENSO
- ECU
- SH7058
- Stock power
- 144 HP
- Stage 1 power
- 190 HP
- Power increase
- +46 HP (+32%)
- Stock torque
- 350 Nm
- Stage 1 torque
- 420 Nm
- Torque increase
- +70 Nm (+20%)
- ECU SW
- T2G2342016
- ECU HW
- E30VU4D
- SW upgrade
- JS57A
- Calibration
- E30VU4D_T2G2342016_JS57A
Variant 5
ECU- Catalog engine
- 2500 144HP
- Generation
- D40 2005-2015
- Matched gains engine
- 2.3DI 144
- Controller brand
- DENSO
- ECU
- SH7058
- Stock power
- 144 HP
- Stage 1 power
- 190 HP
- Power increase
- +46 HP (+32%)
- Stock torque
- 350 Nm
- Stage 1 torque
- 420 Nm
- Torque increase
- +70 Nm (+20%)
- ECU SW
- T2G23420A6
- ECU HW
- E30VU4D
- SW upgrade
- JT30A
- Calibration
- E30VU4D_T2G23420A6_JT30A
Variant 6
ECU- Catalog engine
- 2500 TD 144HP
- Generation
- D40 2005-2015
- Matched gains engine
- 2.3DI 144
- Controller brand
- DENSO
- ECU
- SH7058
- Stock power
- 144 HP
- Stage 1 power
- 190 HP
- Power increase
- +46 HP (+32%)
- Stock torque
- 350 Nm
- Stage 1 torque
- 420 Nm
- Torque increase
- +70 Nm (+20%)
- ECU SW
- T2H2342GC9
- ECU HW
- E311U4D
- SW upgrade
- JS94A
- Calibration
- E311U4D_T2H2342GC9_JS94A
Variant 7
ECU- Catalog engine
- 2500 TD 144HP
- Generation
- D40 2005-2015
- Matched gains engine
- 2.3DI 144
- Controller brand
- DENSO
- ECU
- SH7058
- Stock power
- 144 HP
- Stage 1 power
- 190 HP
- Power increase
- +46 HP (+32%)
- Stock torque
- 350 Nm
- Stage 1 torque
- 420 Nm
- Torque increase
- +70 Nm (+20%)
- ECU SW
- T2H2342026
- ECU HW
- E311U4D
- SW upgrade
- JS68A
- Calibration
- E311U4D_T2H2342026_JS68A
Variant 8
ECU- Catalog engine
- 2500 TD 144HP
- Generation
- D40 2005-2015
- Matched gains engine
- 2.3DI 144
- Controller brand
- DENSO
- ECU
- SH7058
- Stock power
- 144 HP
- Stage 1 power
- 190 HP
- Power increase
- +46 HP (+32%)
- Stock torque
- 350 Nm
- Stage 1 torque
- 420 Nm
- Torque increase
- +70 Nm (+20%)
- ECU SW
- T2H2342057
- ECU HW
- E311U4D
- SW upgrade
- JS62B
- Calibration
- E311U4D_T2H2342057_JS62B
Related vehicles
Other vehicles built on the SH7058 controller or the same engine — handy when a platform spans several models and makes.
Questions, answered.
Which tuning solutions are available for the NISSAN FRONTIER on the SH7058?
Stage 1, Stage 2, DPF Off, EGR Off, Swirl Flaps Off, Lambda / O2, MAF Off, TVA, NOx Off, AGS, Readiness, Start/Stop Off, Oil Pressure, Limp Mode Off. The exact set depends on the specific engine and software version.
Do you cover the SH7058 ECU software on this model?
Yes — the NISSAN FRONTIER on the SH7058 ECU is part of the catalog. Upload your original file and it is matched to the right calibration before any work is done.
How is the file delivered?
Through the TuningBay workflow with operator validation and one safe, sensible result per job. Files we deliver, we stand behind.