Variant 1
ECU- Catalog engine
- 1600 115HP
- Engine code
- CXXB
- Controller brand
- DELPHI
- ECU
- DCM6.2
- Stock power
- 115 HP
- ECU SW
- 4906
- ECU HW
- 04L906056RA
- SW upgrade
- 04L906056RA_4906
- Calibration
- 04L906056RA_4906
AUDI · DCM6.2 ECU · diesel
AUDI A1 DCM6.2 tuning files
Here is what the catalog holds for the AUDI A1 on the DCM6.2. Stock output across the matched variants spans 90–115 HP. There are 8 distinct variants on file for this combination. It is a diesel platform, so the full diesel solution range is on the table. Every file is matched to the exact calibration on your vehicle and signed off by an operator.
Available solutions
Applicable work for the DCM6.2 on this diesel. The available set firms up once the exact engine and software are known.
Stage 1Stage 2DPF OffEGR OffAdBlue OffSwirl Flaps OffLambda / O2MAF OffTVANOx OffAGSReadinessStart/Stop OffOil PressureLimp Mode Off
Engine variants & ECU software
8 distinct variants for the AUDI A1 on the DCM6.2 ECU. Reference the engine and controller software when you upload.
Variant 2
ECU- Catalog engine
- 1400 105HP
- Engine code
- CUSB
- Controller brand
- DELPHI
- ECU
- DCM6.2
- Stock power
- 105 HP
- ECU SW
- 9156
- ECU HW
- 04B906027K
- SW upgrade
- 04B906027K_9156
- Calibration
- 04B906027K_9156
Variant 3
ECU- Catalog engine
- 1400 90HP
- Generation
- 8X 2015-2018
- Matched gains engine
- 1.4 TDI 90
- Controller brand
- DELPHI
- ECU
- DCM6.2
- Stock power
- 90 HP
- Stage 1 power
- 115 HP
- Power increase
- +25 HP (+28%)
- Stock torque
- 230 Nm
- Stage 1 torque
- 280 Nm
- Torque increase
- +50 Nm (+22%)
- SW upgrade
- 04B997027C_2592
- Calibration
- 04B997027C_2592
Variant 4
ECU- Catalog engine
- 1400 90HP
- Generation
- 8X 2015-2018
- Matched gains engine
- 1.4 TDI 90
- Controller brand
- DELPHI
- ECU
- DCM6.2
- Stock power
- 90 HP
- Stage 1 power
- 115 HP
- Power increase
- +25 HP (+28%)
- Stock torque
- 230 Nm
- Stage 1 torque
- 280 Nm
- Torque increase
- +50 Nm (+22%)
- SW upgrade
- 04B997027C_9433
- Calibration
- 04B997027C_9433
Variant 5
ECU- Catalog engine
- 1400 90HP
- Generation
- 8X 2015-2018
- Matched gains engine
- 1.4 TDI 90
- Controller brand
- DELPHI
- ECU
- DCM6.2
- Stock power
- 90 HP
- Stage 1 power
- 115 HP
- Power increase
- +25 HP (+28%)
- Stock torque
- 230 Nm
- Stage 1 torque
- 280 Nm
- Torque increase
- +50 Nm (+22%)
- SW upgrade
- 04B906027H_9155
- Calibration
- 04B906027H_9155
Variant 6
ECU- Catalog engine
- 1400 90HP
- Generation
- 8X 2015-2018
- Matched gains engine
- 1.4 TDI 90
- Controller brand
- DELPHI
- ECU
- DCM6.2
- Stock power
- 90 HP
- Stage 1 power
- 115 HP
- Power increase
- +25 HP (+28%)
- Stock torque
- 230 Nm
- Stage 1 torque
- 280 Nm
- Torque increase
- +50 Nm (+22%)
- SW upgrade
- 04B906027K_9435
- Calibration
- 04B906027K_9435
Variant 7
ECU- Catalog engine
- 1400 90HP
- Generation
- 8X 2015-2018
- Matched gains engine
- 1.4 TDI 90
- Controller brand
- DELPHI
- ECU
- DCM6.2
- Stock power
- 90 HP
- Stage 1 power
- 115 HP
- Power increase
- +25 HP (+28%)
- Stock torque
- 230 Nm
- Stage 1 torque
- 280 Nm
- Torque increase
- +50 Nm (+22%)
- ECU SW
- 9442
- ECU HW
- 04B906027D
- SW upgrade
- 04B906027D_9442
- Calibration
- 04B906027D_9442
Variant 8
ECU- Catalog engine
- 1400 90HP
- Generation
- 8X 2015-2018
- Matched gains engine
- 1.4 TDI 90
- Controller brand
- DELPHI
- ECU
- DCM6.2
- Stock power
- 90 HP
- Stage 1 power
- 115 HP
- Power increase
- +25 HP (+28%)
- Stock torque
- 230 Nm
- Stage 1 torque
- 280 Nm
- Torque increase
- +50 Nm (+22%)
- ECU SW
- 9434
- ECU HW
- 04B906027H
- SW upgrade
- 04B906027H_9434
- Calibration
- 04B906027H_9434
Related vehicles
Other vehicles built on the DCM6.2 controller or the same engine — handy when a platform spans several models and makes.
Questions, answered.
Which tuning solutions are available for the AUDI A1 on the DCM6.2?
Stage 1, Stage 2, DPF Off, EGR Off, AdBlue Off, Swirl Flaps Off, Lambda / O2, MAF Off, TVA, NOx Off, AGS, Readiness, Start/Stop Off, Oil Pressure, Limp Mode Off. The exact set depends on the specific engine and software version.
Do you cover the DCM6.2 ECU software on this model?
Yes — the AUDI A1 on the DCM6.2 ECU is part of the catalog. Upload your original file and it is matched to the right calibration before any work is done.
How is the file delivered?
Through the TuningBay workflow with operator validation and one safe, sensible result per job. Files we deliver, we stand behind.